Our company has accumulate nearly ten years marketing experience.The engineers could deeply know the demand of clients ,enviroment and the safety,So the most advanced technology could be integarated into the product. Tin residue is the main thing that our device facing .After the equipment processing,the dross will be refined ,and the recycled tin could be reused.This Intelligent and efficient model could be used under off-line situation ,and no worker is needed.During the working,the only thing you need to do is putting dross into the machine without any chemical .When the temperature reach 280 degree,the tin qualified for using would be purifed.By using our machine,a large mount of tin could be saved and the mount of the cost will reduce.
Characteristic:
Electric control system:
Use import PLC microcomputer+temperature expansion module control
Human-computer interface:WEINTEK TAI WAN Touch screen
The built-in time control system :time setting in advanced , automatic switch on and off
Heating mode, analog PID function, contactless controlled Si control
Solder dross input system:
Use screw to deliver solder dross to the solder in stirring zone automatically
Tin capacity in the bottom of stirring zone: 90 kg.Outside melting tin system:Make solder dross even heating, fast temperature rising and saving electric energy.
Stirring motor:90W 220V 3P.Use the worm gear and drive stirring mechanism, more effort. Avoid the direct contact between the motor and the high temperature components at the same time.
The stirring mechanism with special design makes solder dross melting evenly and achieve 1 level rough separation.
Solder collecting zone after separation:capacity can reach 20 kg;automatic tin liquid level detection;manual operation for tin emission to shape
The filter box: 3 methods of stainless steel net + water curtain type filtration + activated carbon filter cotton for filtering particle in the smoke and gas with special smell
The basic parameters of the whole machine;
Machine size:1450mm(L)*800mm(W)*1400mm(H);
power supply:3P 380V /AC
Machine power:4.3KW
Working power : 1.5KW
Electronic Part:
Keyboard panel control
OmRON temperature meter vertically display temperature adjustment with accurate temperature.
Uses PID+SSR for temperature control
Uses creepage protection device.
Mixing & Separation System:
Feeding gate: ≤10KG dross*2
316L stainess steel oven can bear high temperature and rust. Max. 70kg “bottom tin” stored in empty oven, needs 60mins to be melt when uses the machine
Technical parameters
Item | (Parameter) |
Mixing motor | 1φ 220V 90W |
Mixing Heating Power | 1.6KW |
Mixing Capacity of Bottom Tin | 10KG |
Temperature Scope | 0-350℃ |
Heating-up time | 50MIN |
Feeding time | Continuous3-4kg/15min |
Dimension Electrical box size | L500*W250*H650 L140*W330*H390 |
Totol Power Consumption | 1.8KW |
Normal running power | 0.4KW |
Power | 220V 50Hz |
Net Weight | Appro*45kg |